Lfo 1 & Lfo 2 Controls; Envelope Follower Controls; Output Controls - Native Instruments Deep Freq Manual

• Wide switches pitch modulation depth between a +- 1 semitone and a +-12 semitone
range.
• Odd/Even controls the level balance of odd and even harmonics.
• O/E Mod: Odd/Even balance modulation depth. Negative values invert modulation.
• O/E Mod Source selects LFO 1, LFO 2 or ENV (unipolar Envelope Follower output) as
source for Odd/Even balance modulation.
• Pan: Voice panning. 0 = Left; 0.5 = Centre; 1 = Right
• LVL adjusts the level of the Voice. Negative values invert phase.
• DLY: Delay time for the Voice in 16th notes.
• LFO: Pan LFO panning modulation depth.
• Pan LFO Select selects either LFO 1 or LFO 2 as source for panning modulation.
5.2.3 LFO 1 & LFO 2 Controls
• Shape selects the LFO waveform.
• Rate sets LFO speed in note values if Clock Sync Mode is on.
• Clock Sync activates Clock Sync mode, syncing LFO speed to song tempo & timeline.
• Speed sets LFO speed in Hz if Clock Sync Mode is off.

5.2.4 Envelope Follower Controls

• Attack: Envelope Follower Attack Time.
• Release: Envelope Follower Release Time.
• SC Scale scales the output of the envelope. Use this to adapt the Envelope Follower
sensitivity to input level.
• Exp: Envelope Follower output is raised to this power. Higher values tend to expand or
exaggerate the waveform, lower values tend to compress it.

5.2.5 Output Controls

•
FX Mix adjusts the Dry/Wet balance for the entire effect.
The Ensembles
(re)Sonitarium
DEEP FREQ - Manual - 30