Miscellaneous Controls; Modulators Section - Native Instruments Skanner User Manual

5.6.4

Miscellaneous Controls

Miscellaneous Parameters
View B — Miscellaneous Controls
[1] FEEDBACK: For display purposes, this shows the point at which a feedback signal is taken
after the effects chain.
[2] MASTER: The Master volume slider controls the level behind the Reverb. The resulting sig­
nal is passed to a Soft Clip stage that will keep the output signal in the normalized range
(-1 ... +1) so that in the stand-alone version of REAKTOR the soundcard will never clip (if the
output volume slider of REAKTOR is not set to larger than 0 dB).
Since the Soft Clip stage is realized by a sine shaper, the saturation only becomes noticeable
with higher amounts of overload. Therefore you can often benefit from the compression effect
of this stage.
[3] SCOPE: Displays the signal at the end of the effect chain, behind the
Soft Clipper. The stereo channels are summed up for the display.
5.7

Modulators Section

The following section contains the sources for modulation of the sample reader position and
some other target parameters.
Overview of SKANNER Ensemble
Effects Section
MASTER and the
SKANNER - Manual - 40