5.2
Overview of SKANNER User Interface - View A
Overview of SKANNER User Interface - View A
[1] Sample Display: this shows the selected sample and the position of the playhead as a light
green line. Use the parameters here to set modulation which determines how the sample is
scanned. See section
↑5.2.1, Sample Display
[2] MASTER Slider: This is the Master level (dB) at the output of the chain of effects. The re
sulting signal is processed by the Soft Clipper before it is passed to the output of REAKTOR.
See section
↑5.2.2, MASTER
[3] GLOBAL LFO: Set the low frequency oscillator that can be routed to the
and the
PRESET
MORPHER. See section
[4] PRESET MORPHER: Perform a linear transition from the parameter settings in one snapshot
to another. See section
[5] MACRO CONTROLS: Set real-time musical control and modulation of parameters. See section
↑5.2.5, Macro Controls Section
5.2.1
Sample Display
The sample display area of SKANNER shows the selected sample and the position of the play
head as a light green line. When the playhead is modulated the position of playhead moves to
different areas as it reads the sample.
for more information.
Slider.
↑5.2.3, Global LFO Section
↑5.2.4, Preset Morpher Section
for more information.
Overview of SKANNER User Interface - View A
MACRO CONTROLS
for more information.
for more information.
Overview of SKANNER Ensemble
SKANNER - Manual - 20