Filter Section - Native Instruments Skanner User Manual

5.5.3

Filter Section

The Filter section contains two 2-pole filters, a high-pass with a cutoff controlled by
knob and a low-pass that is controlled by the
fixed to a value that does not create strong colorization. The keyboard scaling of the cutoff fre­
quencies are adjustable.
The Filter is located behind the Delay and like the Delay it is in the feedback path. This means
it can strongly influence the feedback behavior. Its signal is also available for the output mix
and will influence the sound when it is mixed in.
Filter Parameters
View B — Filter section of the Polyphonic Processing engine.
[1] Scaling: Keyboard scaling of the low-pass filter.
▪ 0: no influence
▪ 1: full tracking with the notes
▪ Origin at C3=60.
[2] LO CUT: Cutoff of the high-pass filter.
[3] Scaling: Keyboard scaling of the high-pass filter.
▪ 0: no influence
▪ 1: full tracking with the notes
▪ Origin at C3=60.
[4] HI CUT: Cutoff of the low-pass filter.
HI CUT knob. The resonances of both filters are
Overview of SKANNER Ensemble
Polyphonic Processing Section
LO CUT
SKANNER - Manual - 34