Table of Contents
Advertisement
This element is for display purposes only but in the full version of REAKTOR a WAV or AIFF
file can be dropped here. The new sample will replace the currently used sample and will be
stored with the Ensemble.
SKANNERS factory-preset Snapshots depend heavily on the supplied samples. If you replace
any samples please save your ensemble with a new name to avoid erasure of the original
samples.
For selecting and replacing samples please use View B. For information on how to switch to
View B please refer to
5.2.2
MASTER Slider
Use the Master slider to adjust the output volume. The Master level is at the output of the
chain of effects. The resulting signal is processed by a Soft Clipper before it is passed to the
output of REAKTOR.
5.2.3
Global LFO Section
This LFO is separate from the polyphonic LFO in View B. It can be routed to the four
CONTROLS
and to the position of the Preset Morphing. It is a monophonic unit that produces
a triangle waveform with adjustable symmetry and can be synced to the global clock and to the
last note-on.
The LFO is assigned to the
knobs. When a switch is on the knob is replaced by a display showing the LFO signal. The LFO
signal modulates the Macro Control in its full range. As the Macro is assigned to its destina
tions via amount controls (in the
modulation depth can be adjusted there.
The LFO can also modulate the Morph position in the
the
LFO AMOUNT
slider beneath the Morph position knob.
↑4.4, Selecting SKANNER A and B Panel Views
MACRO CONTROLS
by the small buttons underneath the their
MACRO CONTROLS
Overview of SKANNER Ensemble
Overview of SKANNER User Interface - View A
.
at the bottom of the View B) the LFO
PRESET
MORPHER. To do this adjust
MACRO
SKANNER - Manual - 21
Advertisement
Table of Contents
