Table of Contents
Advertisement
[6] Morph Control: This is the central element for the control and display of the morph state.
The 8 Snapshots of the selected group are assigned to 8 segments. The green segment indi
cates the selected morph destination and the highlighted orange segment marks the last se
lected Snapshot.
▪ The position of a green dot shows the momentary state of the morph process. When a
morph is started the dot moves from the last selected (orange) segment to the new select
ed (green) segment.
▪ Clicking on a segment selects the assigned Snapshot to be the morph destination (green
color) and starts the morph transition.
▪ A second click on the green segment during the transition will pause it at the current po
sition. The next click it will continue the morph movement.
▪ Clicking on a highlighted orange segment will reverse the morph direction. Orange and
green selections are swapped and if it is not running the morph will be started.
▪ Clicking on another orange field will create a new pair for morphing: the former green seg
ment becomes orange highlighted and the new selected segment will be the green seg
ment.
Switchable parameters like the sample selection are set in the green Snapshot at the begin
ning of a morph transition.
Please note that the parameters in View B cannot be used during a morph transition or when
the
LFO AMOUNT
is above zero.
[7]
LFO
AMOUNT: Modulation amount for the Global LFO controlling the Morph Position.
If the
LFO AMOUNT
View B cannot be used.
5.2.5
Macro Controls Section
The four Macro Controls are easy-to-use and predefined with each Snapshot. The sound de
signers have chosen one or more destination parameters and modulation amounts for each
Macro Control to give access to interesting sound variations.
is above zero the morphing action is active and therefore parameters in
Overview of SKANNER Ensemble
Overview of SKANNER User Interface - View A
SKANNER - Manual - 25
Advertisement
Table of Contents
