Connecting And Configuring Your Router - NetComm Liberty series User Manual

Product Layout

Connecting and Configuring your Router

The Router has been designed to be placed on a desktop. All of the cables exit from the rear of the Router for better organization. The
display is easily visible on the FRONT of the Router to provide you with information about network activity and status. See below for
explanation of each of the features.
Front
Panel
Power
3G
WAN
Internet
Wireless
LAN 1
LAN 2
Rear Ports
Reset/WPS
Button
3G USB
Modem
WAN
LAN (1-2)
Power
NetComm Liberty Series 3G Wireless N150 Wireless Router
10
Icon Description
Lights up when powered oN.
Lights up when the router is connected via 3G
Lights up when the router is connected via WAN
Lights up when the router is connected to the internet via 3G or fixed line WAN
WWW
Lights up when WLAN is enabled. Blinks on traffic
Lights up when specific LAN connection is established. Blinks on LAN PORT
traffic
Lights up when specific LAN connection is established. Blinks on LAN PORT
traffic
Press once to initiate WPS (See WPS section of this document). Hold this
button down for 10 seconds to reset to factory defaults.
USB port for connecting a compatible 3G USB modem
WAN Ethernet port for Fixed Line (ADSL/Cable/Satellite) connection
LAN Ports for wired Ethernet clients (Computers, Laptops, etc)
Power connector, connects to DC 1V 1.5A Power Adapter
YmL1�WN YmL1�WN 1�WN
www.netcomm.com.au