Table of Contents
Advertisement
How To Configure Wireless Security
1.
Open your web browser (i.e. Internet Explorer or Firefox) and navigate to http://192.168.20.1/.
.
Click on Login, then enter your User Name and Password (default: admin/admin).
3.
Mouseover Wireless Settings and then click on Security. On this page you can configure the wireless security.
4.
To use WEP, please configure the following:
•
Change Security to WeP-AUto
•
Type in the key in the WEP Key 1 field (This example uses "a1b2c3d4e5" key)
Notes:
WEP key can only use numbers (0 to 9) and letters (A to F).
•
Click on Save to save the settings
5.
To use WPA-PSK/WPA2-PSK, please configure the following:
•
Change Security to WPA-PSK or WPA-PSK
•
Change encryption type to tKiP for WPA-PSK or AeS for WPA-PSK
•
Enter the WPA/WPA2 key in the Passphrase field.
Notes: The key needs to be more than 8 characters and less than 63 characters and it can be any combination of letters and numbers.
•
Click Apply to save the settings
Notes: Wireless client network cards must be WPA-compliant to connect to a WPA enable network, if in doubt check the wireless client network card documentation, or use WEP
security.
Notes: After changing the security settings, you might need to remove the current wireless settings on the computer and reconfigure the wireless computer according to the new
settings.
3G18Wn User Guide
44
ymL18WN
ymL18WN
18WN
www.netcomm.com.au
Advertisement
Table of Contents
