Security; Security Mode - NetComm LIBERTY N300 User Manual

Security

This page allows you to configure the wireless security for your 3G Router. Setting up sufficient wireless security can prevent unauthorised
access to your wireless network.
Name
SSID Choice:

Security Mode:

Access Policy:
Click Apply to save the settings.
Security Mode
you may choose from the following wireless security options: Disabled, open, Shared, WePAUto, WPA, WPA-PSK, WPA, WPA-PSK,
WPA-PSK-WPA2-PSK, WPA1-WPA2 or 802.1x.
Name
WEP:
ymL18WN 18WN
www.netcomm.com.au
NetComm Liberty Series - 3G Wireless N300 Router
Description
Select the SSID on which to configure the security settings
Select the security mode for the wireless network. See below for more information
This feature allows MAC Address Control, which prevents unauthorized clients from
accessing your wireless network. Select whether to allow/block users on the policy list, and
add their mAC addresses to the list on the format XX:XX:XX:XX:XX:XX
Description
WEP (Wired Equivalent Privacy) is enabled by default to help prevent against unwanted wireless users
accessing your 3G Router. The default 64 bit Hexadecimal WEP key is: a1b2c3d4e5
3G18Wn User Guide 3G18Wn User Guide 3G18Wn User Guide 3G18Wn User Guide
5