Advertisement
CONNECTING THE ROUTER TO THE INTERNET
1.
After establishing a connection using the previous steps, open your Web browser and
type http://192.168.1.1 into the address bar at the top of the web browser window and
press Enter.
2.
Enter admin into both the username and password fields and click Login.
3.
The First-Time Setup Wizard should then be displayed. Click on the Yes, Let's get
started with the wizard button to configure your NetComm Router.
4.
Select your chosen connection type. You can select from:
-
ADSL
-
3G
ADSL:
Select the ADSL connection type and enter the
username/password as supplied by your ADSL provider
Note: To enable a backup connection via 3G, tick the checkbox and then enter
the appropriate 3G connection information. This information should be
supplied by your 3G provider. You will also need to enter a high availability
website (e.g. – www.google.com) in order to verify if your ADSL based
internet connection is currently active.
3G:
Select the APN from the dropdown box (enter your username/password if required) as
supplied by your 3G/4G provider. After selecting the appropriate connection type and entering
the required details, click Next.
1.
Select to enable or disable your wireless network, show or hide your wireless network
(Hide SSID) or change the wireless network name (SSID). After making the appropriate
changes, click Next. (If you do not want to change the default settings, simply click Next)
2.
Select the wireless security and wireless security key you would like to use on your wireless
network and click Next. (If you do not want to change the default settings, simply click Next)
3.
Enter the username and password you would like to use when logging into the web based
user interface. Confirm the new password by entering it a second time in the Retype
Password field and click Next.
(If you do not want to change the default settings, simply click Next)
4.
Review your selected settings and click Finish. If you would like to change any of the
settings, click Back until you reach the required page and adjust your settings accordingly.
Click Next until you reach the summary page again.
The NetComm Router will now attempt to connect using the details you have entered. This
can take up to 2 minutes. If the connection attempt was successful, the Internet Connection
LED
on the front of the unit will then be lit.
ADSL2+ WiFi Modem Router with VoIP- NB16WV
Advertisement
