Table of Contents
Advertisement
Advanced
this page allows you to modify the advanced wireless settings for your 3G router. these settings should not be changed unless you are
aware of what effect they will have.
Name
Beacon Interval:
Data Beacon Rate (DTIM):
Fragment Threshold:
RTS Threshold:
AP Isolation:
TX Power:
WMM Capable:
WMM Parameters:
Broadcast Network Name (SSID):
Click Apply to save the settings.
3G18Wn User Guide
4
Description
Interval of time the wireless router broadcasts a beacon, used to synchronize the wireless network.
Enter a value between 1 and 255 for the Delivery Traffic Indication Message (DTIM). A DTIM is a
countdown informing clients of the next window for listening to broadcast and multicast messages
This specifies the maximum size of a packet during the fragmentation of data to be transmitted. If you
set this value too low, it will result in bad performance.
When the packet size is smaller than the RTS threshold, the wireless router will not use the RTS/CTS
mechanism to send this packet.
This feature allows you to isolate clients on your wireless network. To enable communication between
the wireless clients connected to your 3G router, select Disabled. to cut the communication between
the wireless clients, please choose enabled.
this determines the output power of the antenna
WMM (Wi-Fi Multimedia) if enabled supports QoS (Quality of Service) for experiencing better audio, video
and voice in applications
Click on the WMM Configuration button to configure the WMM parameters
Select 'Disabled' to hide the SSID of your 3G Router. If disabled, other people will not be able scan and
detect this product's SSID.
ymL18WN
ymL18WN
18WN
www.netcomm.com.au
Advertisement
Table of Contents
