NetComm LIBERTY N300 User Manual page 14

Liberty series 3g wireless n300 router
Table of Contents

Advertisement

3G Internet Settings
Click Apply to save the settings
If everything is configured properly, the Status page will show that your 3G service is online and the WAN IP address that has been
assigned.
3G Connection Status Page
APN (Access Point Name) for various providers
ISP
Telstra
BigPond
Three (Postpaid)
Three (Prepaid)
Vodafone
Optus (postpaid)
Optus (prepaid)
DODO
iburst
Note: this table is up to date as of the printing of this manual
For Non-3G Connections
Note: before proceeding with this step, ensure that your WAN connection has been plugged into the WAN port of your 3G router
To configure a non WAN connection (Static, DHCP, PPPoE, PPTP), please follow these steps:
Mouseover Internet Settings and click on WAN
Select your WAN Connection type from the dropbox (Static, DHCP, PPPoE, PPTP)
enter the relevant information on this screen as supplied by your iSP
Click Apply to save the settings
If everything is configured properly, the Status page will show that your WAN service is online and the WAN IP address that has
been assigned.
Non-3G connection status page:
3G18Wn User Guide
14
APN
Username/Password
Required
telstra.internet
No
telstra.bigpond
yeS
3netaccess
No
3services
No
vfinternet.au
No
connect
No
preconnect
No
dodolns1
No
Wirelessbroadband
No
No APN
yeS User/password only
ymL18WN
ymL18WN
18WN
www.netcomm.com.au

Advertisement

Table of Contents
loading

This manual is also suitable for:

Liberty seriesLiberty 3g18wn

Table of Contents