Mac/Ip/Port Filtering - NetComm LIBERTY N300 User Manual

Firewall

mAC/iP/Port Filtering

This page allows you to setup MAC, IP and port filtering rules to protect your network from malicious activity. The filtering rules can be used
to either allow or block certain users and/or ports from accessing the Internet.
Basic Settings
Name
MAC/IP/Port Filtering:
Default Policy:
MAC/IP/Port Filtering Settings
Name
MAC Address:
Dest IP Address:
Source IP Address:
Protocol:
Dest Port Range:
Source Port Range:
Action:
Comment:
Click Apply to save the settings.
ymL18WN 18WN
www.netcomm.com.au
NetComm Liberty Series - 3G Wireless N300 Router
Description
Select enable to enable mAC/iP/Port Filtering
Select whether packets that do not match any rules are accepted or dropped
Description
mAC address of a local computer
Destination IP Address for the filter rule
Source IP Address for the filter rule
Select the port number protocol type (TCP, UDP or both). If you are
unsure, then leave it to the default "TCP&UDP" setting
Destination Port Range of the filter rule
Source Port Range of the filter rule
Either accept or drop the packet that matches the rule
Add a comment to identify the rule (optional)
3G18Wn User Guide 3G18Wn User Guide 3G18Wn User Guide 3G18Wn User Guide
9