Configuring Snmp Trap Hosts - Nortel Alteon OS 42C4911 Application Manual

CLI oper equivalent
/c/sys/ssnmp/snmpv3/usm 5
/c/sys/ssnmp/snmpv3/access 4
/c/sys/ssnmp/snmpv3/group 4
/c/sys/ssnmp/snmpv3/view 20
/c/sys/ssnmp/snmpv3/view 21
/c/sys/ssnmp/snmpv3/view 22
/c/sys/ssnmp/snmpv3/view 23
/c/sys/ssnmp/snmpv3/view 24
/c/sys/ssnmp/snmpv3/view 25

Configuring SNMP Trap Hosts

SNMPv1 trap host
1. Configure a user with no authentication and password.
/c/sys/ssnmp/snmpv3/usm 10
2. Configure an access group and group table entries for the user. Use the following com-
mand to specify which traps can be received by the user
/c/sys/ssnmp/snmpv3/access <x>/nview
42C4911, January 2007
name "oper"
name "opergrp"
rview "oper"
wview "oper"
nview "oper"
uname oper
gname opergrp
name "usr"
tree "1.3.6.1.4.1.1872.2.5.1.2"
name "usr"
tree "1.3.6.1.4.1.1872.2.5.1.3"
name "usr"
tree "1.3.6.1.4.1.1872.2.5.2.2"
name "usr"
tree "1.3.6.1.4.1.1872.2.5.2.3"
name "usr"
tree "1.3.6.1.4.1.1872.2.5.3.2"
name "usr"
tree "1.3.6.1.4.1.1872.2.5.3.3"
name "v1trap"
Alteon OS Application Guide
(Configure the oper)
(Configure access group 4)
(Assign oper to access group 4)
(Create views for oper)
(Agent statistics)
(Agent information)
(L2 statistics)
(L2 information)
(L3 statistics)
(L3 information)
(Configure user named "v1trap")
Chapter 1: Accessing the Switch 39