Possible Connection Configurations - Siemens NCM S7 Manual

4.2

Possible Connection Configurations

Communication connections are possible between the communication partners
shown in the diagram below.
The communication partners can be in the same project or distributed in the
subprojects of a multiproject.
Connections to communication partners outside a project are configured using the
STEP 7 object "Partner other project" or using substitute objects such as "Other
stations" or SIMATIC S5.
Ethernet CP
S7 – 400
Ethernet CP
PG/PC with Ethernet CP
S7 – 400
Figure 4-2 Possible Connections
SIMATIC NET NCM S7 for Industrial Ethernet
C79000-G8976-C129–06
S7 – 300
Ethernet CP
Subnet 1
SIMATIC S5
Subnet 2
Ethernet CP
Configuring Communication Connections
Ethernet /IT-CP
S7 – 400
WAN*
Ethernet CP
LAN *
Other station with
Ethernet attachment
only TCP/IP
85