Configuring Communication Connections
4.1
Procedure
Steps
The following steps are necessary to operate connections on the SIMATIC S7 PLC
with the Ethernet CP:
Configuring
Create new
connections
Configure connection
properties.
necessary steps
optional steps
Figure 4-1
Operating Connections with the Ethernet CP
84
If necessary,
configure "Other
Station" for
connections using the
appropriate tool.
Download connection configurations
to the CP
Programming
Program the
SEND/RECEIVE interface in
the user program.
(Refer to Section 3.2 and the
detailed FC description in
Chapter 5).
SIMATIC NET NCM S7 for Industrial Ethernet
C79000-G8976-C129–06