Specifying Iso Transport Dynamic Properties - Siemens NCM S7 Manual

4.4.3

Specifying ISO Transport Dynamic Properties

Dynamics Tab
The Dynamics tab displays the relevant timers and counters of this connection.
You can normally accept these default values.
If necessary, for example with connections to non-Simatic systems, you can set
the timers and counters individually and influence the dynamic response of the
connection.
Figure 4-10 Layout of the "Dynamics" Tab of the Properties Dialog
Attributes
Connection Establishment
Retransmission Time
Data Transfer
Retransmission time
Max. Count
SIMATIC NET NCM S7 for Industrial Ethernet
C79000-G8976-C129–06
Description
The retransmission time specifies the interval after
which an unsuccessful connection establishment
attempt can be triggered again (1–60 s, default 5 s)
– if connection establishment is active
– if connection establishment is passive (–> irrelevant)
This parameter specifies the interval after which an
unsuccessful transmission attempt can be triggered
again (100–30000 ms, default 1000 ms).
Max. Count is the number of attempted transmissions
including the first (1–100, default 5).
Configuring Communication Connections
Access
Modifiable
–––––
Modifiable
Modifiable
105