Procedure - Siemens NCM S7 Manual

2.2

Procedure

A CP is managed in an S7 project just as the other modules. You use STEP 7 to
configure the hardware and create and manage the user software (see /6/).
Configuring a CP involves the following basic steps (the broken lines indicate
options):
Program the SEND/RECEIVE interface (Chap. 3)
The steps are explained in detail in the sections shown.
Fields with broken lines are optional.
SIMATIC NET NCM S7 for Industrial Ethernet
C79000-G8976-C129–06
Installing and Starting the Ethernet CP with STEP 7
Create the Industrial Ethernet subnet (see 2.2.1)
Check or set the network properties
Enter the Ethernet CP in the hardware configuration
(see 2.2.2)
Attach the Ethernet CP to the Ethernet subnet
(see 2.2.2)
Display the network attachments of a station (see 2.2.3)
Make further CP settings (see 2.2.4)
Configuring communication services (Chap 4)
– S7 connections /6/
– ISO transport connections
– ISO-on-TCP connections
– TCP connections
– UDP
Configuration data in
the STEP 7 project
Download the configuration to the PLC (see 2.4).
45