Configuring Communication Connections - Siemens NCM S7 Manual

Configuring Communication Connections

This chapter explains the following:
S The general aspects of configuring communication connections
S How to configure ISO transport connections, ISO-on-TCP and TCP connections
S How to use the connection configuration functions to specify communication
partners that exchange data via UDP
You will find a description of the connection-specific properties dialogs in the
following sections:
S ISO transport connections see Section 4.4
S ISO-on-TCP connections see Section 4.5
S TCP connections see Section 4.6
S UDP see Section 4.7
You will find further information in the following sources:
S For the properties of the configurable connection types, refer to Section 1.5.
S For the properties of the configurable connection type E-mail, refer to /5/.
S You will find information on the numbers of connections and amounts of data in
Section 3.1.
S For information on configuring connections, refer to the online help of STEP 7
by selecting Help
SIMATIC NET NCM S7 for Industrial Ethernet
C79000-G8976-C129–06
" Contents.
4
83