Network Controller Problems - HP ProLiant ML100 Series User Manual

Be sure no line interference exists. Retry the connecti
2.
conditions remain poor, contact the telephone company to have the line test
Be sure an incoming call is not breaking the connection due to call waiting. Disable call w
3.
and then reestablish the con
AT command initialization string
Action: U se the most basic string possible to perform the task. The default initialization string is
AT&F&C1&D2&K3.
Connec tio errors are occurring n
Act io n:
Check the maximum baud rate for the modem to which you are connecting, and then change the
1.
baud rate to match.
If the line you are accessing requires error control to be turned off, do so using the AT command
2.
AT&Q6%C0.
Be sure no line interference exists. Retry the connection by dialing the nu
3.
conditions remain poor, contact the telephone company to have the line test
Be sure the modem is current and compliant with CCITT and Bell standards. Replace with a
4.
supported modem if needed.
You are n u able to connect to an online subscription service
Action:
If the line you are ac
1.
AT&Q6%C0.
If the ISP you are accessing requires acc
2.
communications software to correct the
If th is does not work, force a slower baud rate (14400 baud) with the AT command
3.
AT&Q6N0S37=11.
You are n u able to connect at 56 Kbps
Action:
Find out the maximum baud rate at wh
1.
Reattempt to connect at a lower baud
Be sure no line interference exists. Retry the connec
2.
conditions remain poor, contact the telephone com
Netw k or controller problems
Network controller is installed but not working
Action:
Check the network controller LEDs to see if any statuses indicate the source of the problem. For LED
1.
information, refer to the network controller documentation.
nection.
is not working
cessing requires error control to be turned off, do so using the AT command
ess at a decreased baud rate, reconfigure the
connection baud rate to match the ISP.
ich the ISP connects, and change the settings to reflect this.
rate.
on by dialing the number several times. If
mber several times. If
tion by dialing the number several times. If
pany to have the line tested.
ed.
aiting,
ed.
Troubleshooting 77