HP ProLiant ML100 Series User Manual page 56

NOTE: For the location of server LEDs and information on their statuses, refer to the server
documentation.
Possible causes:
•
Improperly seated or faulty power supply
•
Loose or faulty power cord
•
Power source problem
•
Power on circuit problem
•
Impr operly seated component or interlock problem
•
Fault y internal component
Ite m See
1 Server maintenance and service guide, located on the Easy Set-up CD
or the HP website (http://www.hp.com/
2 "General diagnosis flowchart (on page 53)"
3 "Loose connections (on page 50)"
4 "Power source problems (on page 63)"
5 •
"Power supply problems (on page 63)"
•
Server maintenance and service guide, located on the Easy Set-up
CD or the HP website
(http://www.hp.com/products/servers/platforms)
6 "System open circuits and short circuits (on page 73)"
products/servers/platforms)
Troubleshooting 56