Downloading Design Files To The Fpga; Selecting A Software Application To Run When The Fpga Is Configured - Xilinx MicroBlaze User Manual

Downloading the Design and Launching XPS
or, if all files are up to date, then it will say:

Downloading Design Files to the FPGA

The following two sections illustrate two methods of downloading a Software Application
into the FPGA. The first method is when the Software Application can be incorporated into
the FPGA bitstream. The second method illustrates loading a selected application into the
FPGA using the GDB debugger for software development and debugging.

Selecting a Software Application to Run When the FPGA is Configured

In this step the Software Application that will be loaded when the FPGA is initially loaded
with a new bitstream will be selected. Please select the XPS Software Application tab.
There are 3 options that can be selected when choosing the Software Application. This first
example will show how a Software Application can be initially added to the FPGA
bitstream. This will configure the MicroBlaze Microcontroller program and Data memory
with the software application already pre-loaded. This means that as soon as the FPGA has
been successfully configured, the MicroBlaze Microcontroller Software Application will
already be running on the MicroBlaze Microcontroller Hardware Application.
In this case, although multiple software applications could overlap in the Bram, only one
software application can be selected at one time. To select the desired application, perform
the following steps:
1.
2.
3.
4.
MicroBlaze Microcontroller Ref Des User Guide
UG133 January 7, 2005
...
make: Nothing to be done for `init_bram'.
Done.
Select the Application tab the XPS window.
Right click on Project: Calculator_App.
Set "Mark to Initialize BRAMs". The Project: Calculator_App will have a small green
arrow appear to the left of the text.
Confirm that "Mark to Initialize BRAMs" is not checked for the other projects and
default applications. The Graphic to the left of each other application should appear as
a green arrow with a red 'X' over it. Verify that this is the case for
'microblaze_0_bootloop', 'microblaze_0_xmdstub', and 'Project: TestApp'. If any are
set, please Right click and confirm that "Mark to Initialize BRAMs" is not checked. If
checked, click to deselect it. The green arrow should then appear with a red "X".
www.xilinx.com
R
6