Canon MG5100 series On-Screen Manual page 913

Advanced Guide > Appendix
> Setting Up the Card Slot as the Memory Card Drive of the Computer
U020
Setting Up the Card Slot as the Memory Card Drive of the
Computer
The Card Slot of the machine can also be used as the memory card drive of the computer.
Important
When Read/write attribute in Device user settings in Device settings is set to Writable from PC
using the Operation Panel of the machine, you cannot print photos on a memory card using the
Operation Panel of the machine. After using the Card Slot as the memory card drive of the
computer, remove the memory card, be sure to set Read/write attribute to Not writable from PC.
When you turned off the machine, Writable from PC will be canceled and the setting is returned to
Not writable from PC when you turn on the machine next time.
1.
Make sure that the memory card is not set.
If the memory card is set, remove it from the Card Slot. For details, refer to
2.
Select Setup on the HOME screen.
Note
For details on how to select a menu on the HOME screen, refer to
3.
Select Device settings, then press the
4.
Use the button to select Device user settings, then press the
5.
Use the button to select Read/write attribute, then press the OK button.
6.
Specify the read/write attribute.
Not writable from PC
The Card Slot is used only for reading. Be sure to select this mode when printing photos from a
memory card.
Writable from PC
The Card Slot is used as the memory card drive of the computer. Photo data can be written into the
memory card.
7.
Press the OK button.
Important
If you use the Card Slot as the memory card drive of the computer, you need to perform a "safe
removal" operation on your computer before physically removing the memory card from your
machine.
Right-click the
screen, confirm that the Access lamp is not flashing and remove the memory card.
OK
Removable Disk icon and click Eject. If Eject is not displayed on the
Printing Photos
Overview of the Machine
button.
button.
OK
.
.
Page top