Canon MG5100 series On-Screen Manual page 800

Advanced Guide >
Changing the Machine Settings
U077
Device user settings
Date display format
Changes the display format of shooting dates when printed.
Note
When ON is selected for Print date on the print settings screen in printing from a memory card
or a USB flash drive, the shooting date is printed in the date display format you selected. For
print settings, see Setting Items
The shooting date format is as specified in the DPOF setting from DPOF printing.
Read/write attribute
Selects whether to allow data to be written onto memory cards from a computer.
Important
Remove the memory card before changing this setting. For details, see
Slot as the Memory Card Drive of the Computer
If you set this setting to Writable from PC, you cannot print photos on a memory card using the
Operation Panel of the machine. After you finish operation of the memory card dedicated drive,
be sure to set it back to Not writable from PC. When you turn off the machine, Writable from PC
will be canceled and the setting is returned to Not writable from PC when you turn on the
machine next time.
Quiet mode setting
Enables this function on the machine if you want to reduce the operating noise, such as when
printing at night.
Enabling this function reduces the noises generated in the following cases:
Copying
Printing from a memory card/USB flash drive
Printing from a printed photo
Printing from a PictBridge compliant device
Printing from a mobile phone
Printing a template form
Important
Operating speed may be reduced compared to when this setting is set to OFF.
This function may not be so effective depending on the machine's setting.
Furthermore, certain noise, such as when the machine is preparing for printing, is not reduced.
Note
The noises generated while scanning or printing from the computer can also be reduced. To
reduce these noises, you need to configure the settings on the computer.
For the noises while scanning, refer to
For the noises while printing from the computer, refer to
Guide display settings
Changes the time before the guidance is displayed on the LCD, or selects not to be displayed.
Key repeat
Enables/Disables continuous input by pressing and holding down the
> Changing the Machine Settings on the LCD
.
.
Scanner Tab .
Reducing the Machine Noise
> Device user settings
Setting Up the Card
.
+, or - button
, , , ,