Canon MG5100 series On-Screen Manual page 46

- Scanned data saved as a PDF file with MP Navigator EX
For details, refer to the on-screen manual:
When the program selection screen appears:
The program selection screen may appear after performing step 3.
If the program selection screen appears, select MP Navigator EX Ver4.0 and click OK.
To start MP Navigator EX automatically without displaying the program selection screen, follow
the procedure below.
- For Windows 7 or Windows Vista users, refer to "For Windows Users" in "
of the on-screen manual:
- For Windows XP users, select MP Navigator EX Ver4.0 as the software application to be
used in the program selection screen, select Always use this program for this action, then
click OK.
Changing the Settings
Press the right Function button to select Scan settings on the scan standby screen when Document or
Photo is selected for Doc. type. You can select the item, such as scan size, data format, or resolution,
and change the setting.
For the setting operation, see
The setting items described below are available when Document is selected for Doc. type.
*1
Scan size
(1)
Select the size of the original to be scanned: A4, 4"x6" (10x15cm), etc. When Auto crop is selected, the
size of the original is detected automatically.
Format
(2)
Select the data format to save the scanned data: PDF, Compact PDF, TIFF or JPEG.
Scan res (Scan resolution)
(3)
Select the resolution at which to scan the original: 75 dpi, 150 dpi, 300 dpi, or 600 dpi.
Preview
(4)
Display a preview of the scanned image on the LCD when Memory card or USB flash drive is selected in
Save/Forward and the original is scanned from the Platen Glass.
Reduce show-thru
(5)
Reduce show-through of the opposite side of a text document, or lighten the color of recycled paper,
newspaper, etc.
*2
Descreen
(6)
Reduce the moire effect when uneven gradations or stripe patterns appear on the original to be scanned.
Unsharp mask
(7)
Emphasize outlines of subjects and sharpen the image when the original image is not clear.
*1
You can select Multi crop when Photo is selected for Doc. type. Then, when two or more photos are loaded
on the Platen Glass, each photo is scanned as an individual image.
*2
This setting item is not available when Photo is selected for Doc. type.
Note
Available setting items are different when you select an option other than PC in Save/Forward.
For details, refer to the on-screen manual:
Advanced Guide
Advanced Guide .
Basic Operation on the Settings Screen
*2
Advanced Guide
.
Troubleshooting
.
.
"