Canon MG5100 series On-Screen Manual page 472

Advanced Guide >
Scanning > Scanning with Using the Operation Panel of the Machine
Using the Operation Panel of the Machine to E-mail
U101
Attaching the Scanned Data Using the Operation Panel of the
Machine to E-mail
You can attach scanned data to an e-mail using the Operation Panel of the machine.
Before attaching scanned data to an e-mail, confirm the following:
The necessary application software (MP Drivers and MP Navigator EX)
is installed.
If the application software (MP Drivers and MP Navigator EX) is not yet installed, insert the
ROM into the computer's disc drive, then perform Custom Install and select MP Drivers and MP
Navigator EX to install.
The machine is connected to a computer correctly.
Make sure that the machine is connected to the computer correctly.
Do not plug in or unplug the USB when scanning images with the machine, or when the computer is
in sleep or standby mode.
The mail software and the file name are specified in MP Navigator EX.
You can specify the mail software and the file name in MP Navigator EX. For details on how to
perform settings or the initial settings, refer to
1.
Make sure that the machine is turned on.
2.
Select Scan on the HOME screen.
The Save/Forward to screen is displayed.
Note
For details on how to select a menu on the HOME screen, refer to
If the Scan standby screen for forwarding the data to the USB-connected computer is displayed
on the LCD, press the left Function button to display the Save/Forward to screen.
3.
Select Attach to E-mail, then press the
The Scan standby screen is displayed.
> Attaching the Scanned Data
Scanner Button Settings Tab (Attach to E-mail)
Overview of the Machine
button.
OK
Setup CD-
.
.