Canon MG5100 series On-Screen Manual page 872

2.
Select the Start menu > Control Panel > Hardware and Sound > Scanners and
Cameras.
3.
Select WIA Canon XXX ser (where "XXX" is your machine's name), then click the
Properties button.
If the User Account Control screen appears, click Continue.
4.
Click the Events tab on the WIA Canon XXX ser Properties (where "XXX" is your
machine's name) screen.
5.
Select Start this program for Actions, then select MP Navigator EX Ver4.0 from
the pull-down menu.
Choose an event from the Select an event pull-down menu, then select MP Navigator
EX Ver4.0 to launch for each event. If MP Navigator EX Ver4.0 is already selected for
each event, click Cancel.
6.
Click OK.
Page top