Canon MG5100 series On-Screen Manual page 649

Advanced Guide >
Scanning >
ScanGear (Scanner Driver) > Starting ScanGear (Scanner Driver)
S202
Starting ScanGear (Scanner Driver)
Use ScanGear (scanner driver) to make image corrections and color adjustments when scanning.
ScanGear can be started from MP Navigator EX or an application.
Starting from MP Navigator EX
Navigation Mode Screen
Follow these steps to start ScanGear from the Navigation Mode screen of MP Navigator EX.
Start MP Navigator EX and open the Navigation Mode screen.
1.
Starting MP Navigator EX
In Scan/Import, click Photos/Documents (Platen).
2.
The Scan/Import window opens.
Select the Use the scanner driver checkbox, then click Open Scanner Driver.
3.
The ScanGear screen appears.
One-click Mode Screen
Follow these steps to start ScanGear from the One-click Mode screen of MP Navigator EX.
Start MP Navigator EX and open the One-click Mode screen.
1.
Starting MP Navigator EX
Click the corresponding icon.
2.
The corresponding dialog box opens.
Scanning with Other Application Software
> Scanning with Advanced Settings Using