Canon MG5100 series On-Screen Manual page 734

*1 Photos are optimized for printing using the Photo optimizer pro function.
*2 Can be selected only on certain Canon-brand PictBridge compliant devices.
(May not be selected depending on the device.)
Trimming
Default (Off: No trimming), On (follow the camera's setting), Off
Settings on the Machine
You can change the PictBridge print settings from the PictBridge print settings screen. Set the print
settings to Default on the PictBridge compliant device when you want to print according to the
settings on the machine.
This section describes the procedure to display the PictBridge print settings screen. For setting
items, see
PictBridge print settings
1.
Select Setup on the HOME screen.
Note
For details on how to select a menu on the HOME screen, refer to
.
Machine
2.
Device settings, then press the OK button.
Select
3.
Use the button to select PictBridge print settings, then press the
4.
Check the message that is displayed, then press the
The PictBridge print settings screen is displayed.
.
OK button.
Overview of the
OK button.
Page top