Canon MG5100 series On-Screen Manual page 67

> > Machine Settings
Contents Other Usages
C064
Machine Settings
This section describes the items you can set or change in Device settings of Setup.
For details on setting or changing, refer to the on-screen manual:
Plain paper feed settings
Selects the paper source (Rear Tray or Cassette) in which you load plain paper. The machine feeds
plain paper from the Cassette by default. Use this setting to change the paper source for plain
paper to the Rear Tray.
Print settings
Prevent paper abrasion
Use this setting only if the print surface becomes smudged.
Extended copy amount
Selects the amount of image that extends off the paper when selecting Borderless copy in Copy
menu.
Auto photo fix setting
Selects whether or not to prioritize the Exif information saved on a photo when Auto photo fix is
selected.
Device user settings
Date display format
Selects the format of date that is displayed on the LCD or printed on papers.
Read/write attribute
Selects whether to use the Card Slot of the machine as the memory card drive of a computer.
Quiet mode setting
Enables this function if you want to reduce the operating noise of the machine, such as when using
the machine at night (when copying, printing from the memory card, printing from the PictBridge
compliant device, printing with wireless communication, etc.).
Guide display settings
The guidance appears at the top of the operation screen or settings screen. You can change the
time interval before the guidance appears or hide it.
Key repeat
Enables to increase or decrease numbers rapidly by pressing and holding down the button when
inputting numbers. When this setting is disabled, holding down the button is the same as pressing
it once.
Mobile phone print settings
Specifies paper or image correction when you print from the wireless communication device. This
setting appears only when the optional Bluetooth Unit is connected to the machine.
Advanced Guide Troubleshooting
.
Advanced Guide