7.3 Entering Message for Internal Printer (Page: 3/3)
7.3.2 How to Enter the Characters
Move the position cursor to the required position
1
Press
Select the required character
2
Press
turn the roller to select the character.
Enter the character
3
Press
Enter the whole message
4
Repeat the steps from 2 to 3 until the whole message is entered.
7.3.3 How to Insert
Move the position cursor to the required position
1
Press
Insert a space
2
Press
where the cursor was.
Enter the character
3
Repeat the steps 2 and 3 in section 7.3.2.
switch or
FIXATION
LIMITER
switch to select the line that includes the required character. Then,
PRINT
START
switch.
switch or
FIXATION
LIMITER
switch. A space of one character will be inserted at the place
CHIN REST
– 40 –
switch.
switch.