How To Enter The Characters; How To Insert - Canon R-F10 Operation Manual

6.3.2 How to Enter the Characters

1
Move the position cursor to the required position
Press
2
Select the required character
Press
the roller to select the character.
3
Enter the character
Press
4
Enter the whole message
Repeat the steps from 2 to 3 until the whole message is entered.

6.3.3 How to Insert

1
Move the position cursor to the required position
Press
2
Insert a space
Press
A space of one character will be inserted at the place where the cursor was.
3
Enter the character
Repeat the steps 2 and 3 in section 6.3.2
6.3 Entering Message for Internal Printer (Page: 3/3)
IOL switch or VD switch.
switch to select the line that includes the required character. Then, turn
PRINT
START switch.
IOL switch or VD switch.
CHIN REST ↑ ↑ ↑ ↑ ↑
switch
– 32 –