Maintenance And Inspection - Canon TX-F Operation Manual

Handling
CAUTION
!
When Problem Occurs
WARNING
!

Maintenance and Inspection

WARNING
!
WARNING
!
WARNING
!
WARNING
!
CAUTION
!
This instrument uses a lithium battery, which may pollute the environment if
the instrument is abandoned.
Please contact Canon representative or distributor before disposing of the
instrument.
Should any of the following occur, immediately turn OFF the power of each
instrument, unplug the power cable from the AC outlet, and contact Canon
representative or distributor.
- When there is smoke, odd smell or abnormal sound.
- When liquid has been spilled into the instrument or a metal object has
entered through an opening.
- When the instrument has been dropped and it is damaged.
For safety reasons, be sure to turn OFF the power of each instrument when
the inspections indicated in this manual are going to be performed.
Otherwise, it may result in electric shock.
When the instrument is going to be cleaned, be sure to turn OFF the power of
each instrument, and unplug the power cable from the AC outlet.
Never use benzine, thinner or any other flammable cleaning agents.
Otherwise, fire or electric shock may result.
Clean the plug of the power cable periodically by unplugging it from the AC
outlet and removing dust or dirt from the plug, its periphery and AC outlet with
a dry cloth. If the cable is kept plugged in for a long time in a dusty, humid or
sooty place, dust around the plug will attract moisture, and this could cause
insulation failure which could result in a fire.
The instrument must be repaired by a qualified engineer only.
If it is not repaired properly, it may cause fire, electric shock, or accident.
For safety reasons, be sure to inspect the instrument before using it.
(5)
Safety Information