Canon TX-F Operation Manual page 68

8.4 Replacement
The paper will automatically come out
9
If the power is ON, the end of
paper will automatically come
out from the slot in the front.
NOTES: 1. If the edge of paper is creased, it may not feed through printer prop-
Close the cover
10
Pull out the edge of paper from
the printer cover slot and close
the cover.
erly. In this case, pull out the paper, neatly cut off the end of paper
and reload.
2. If the paper is fed through the printer aslant, it may cause paper jam.
Lower the lever and straighten the paper. Then, raise the lever again.
Do not touch the cutter for the printing paper.
CAUTION
!
Otherwise, fingers may be cut.
– 58 –