Table of Contents
Advertisement
7.2 Settings for Printing and Transfer (Page: 2/3)
AUTO PRINT
DEFAULT
(
) LEVEL
CHARACTER
Press AUTO/MANU. switch to proceed to page 3/3.
Press CLEAR (DEMO) switch to return to measurement mode.
Whether to automatically have the results of measuring both eyes
printed out in FULL AUTO mode
"
ON
":
"
OFF
":
Choosing whether to automatically return to AUTO mode or
FULL AUTO mode in the following cases:
- After power is turned ON
- After pressing
- After deleting data by pressing
- After recovering from power-saving mode
"
":
AUTO
"
FULL AUTO
Choosing whether to display level meter on the measurement mode
screen, display mode screen and printout.
Level meter is a mark showing the waveform level of the signal
obtained by detecting light reflected from the cornea when air is
blown onto the eye.
"
ON
":
"
OFF
":
The type of characters displayed for entering message on page 3/3
can be selected. See the illustration of the monitor in section 7.3.
"
JIS
":
"
LATIN-1
Press PUFF TIMES switch to return to page 1/3.
Results will be printed out automatically.
PRINT
switch must be pressed to print out the results.
When "
PRINT
" and "
"
" will also be set to "
AUTO PRINT
PRINT
switch
The instrument returns to AUTO mode.
": The instrument returns to FULL AUTO mode.
Level meter will be displayed.
Level meter will not be displayed.
Japanese characters will be displayed.
": Characters such as with umlaut will be displayed.
– 38 –
TRANS
" are set to "
OFF
".
OFF
CLEAR (DEMO)
switch
",
Hide quick links:
Advertisement
Table of Contents
