Canon TX-F Operation Manual page 45

[ODR]
WARNING IOP
WARNING IMG
Press AUTO/MANU. switch to proceed to page 2/3.
Press CLEAR (DEMO) switch to return to measurement mode.
" " - " ": Month (When "
JAN DEC
below, month will be displayed in numbers "
" 12
" 2000 " - " 2099 ": Year
" 00 " - " 23 ": Hour
" " - " ": Minutes
00 59
[
How to change the setting]
(1) Select the item by turning roller, or by pressing
switch or
LIMITER
(2) Number increases when
Order of displaying the date
" ": Year, month, day
YMD
" ": Month, day, year
MDY
" ": Day, month, year
DMY
Choosing whether to display a warning message ("
xx* mmHg! ") and stop measurement when the result of measuring
the eye in FULL AUTO mode is above or below the value selected
here. See step 6 in section 5.2.
* Value set here will be displayed.
[How to change the setting]
(1) Select " " by turning roller, or by pressing
UNDER
switch or LIMITER
(2) Press PRINT switch to select the required setting for
" UNDER ".
" ": Warning message will not be displayed and mea-
OFF
surement will not stop.
" " - " ": Warning message will be displayed and measure-
1 9
ment will stop when the result is below the intraoc-
ular pressure selected here.
(3) Select " ABOVE " by turning roller, or by pressing
switch or
LIMITER
(4) Press switch to select the required setting for "
PRINT
" ": Warning message will not be displayed and mea-
OFF
surement will not stop.
" " - " ":Warning message will be displayed and measure-
15 25
ment will stop when the result is above the intraoc-
ular pressure selected here.
Choosing whether to display a still image immediately after mea-
surement error has occurred in order to enable the cause of the error
to be determined.
" ": Error image will be displayed.
ON
" OFF ": Error image will not be displayed.
– 35 –
7.1 Settings for Measurement (Page: 1/3)
" is selected for "
YMD
")
switch.
PRINT switch is pressed.
switch.
switch.
"
ORDER
" -
1
FIXATION
[5] IOP >(<) =
FIXATION
FIXATION
".
ABOVE