Canon TX-F Operation Manual page 71

Connect the power supply cable to the instrument
3
Hold the instrument firmly with your hand and securely connect the power supply
cable to the power supply connector on the bottom of the instrument. See section
3.2.
Set up the instrument
4
Connect the power supply cable to an AC outlet
5
Place the chin rest paper on the chin rest
6
See section 8.4.1.
Load the printing
7
See section 8.4.2.
Customize the settings as required
8
Turn ON the power and change the settings concerning the measurement as
required. See chapter 7.
If you are using external equipment
9
Please contact Canon representative or distributor.
– 61 –
9.1 Installation