Precautions When Moving The Instrument - Canon TX-F Operation Manual

9.2 Precautions when Moving the Instrument

9.2 Precautions when Moving the Instrument
WARNING
!
WARNING
!
NOTE: When the instrument is going to be transported by automobile, etc., it must be pro-
tected against vibration and shocks. Contact Canon representative or distributor
for advice on the procedure for packing it.
Move the measurement head to the center
1
Turn ON the power while pressing the
Release the switch when you hear a beeping sound.
Turn OFF the power
2
Turn OFF the power switch.
Disconnect the cables
3
Lay the instrument in the same position as when connecting the power cable (see
section 9.1). After disconnecting all the cables, set the instrument upright again.
Carrying the instrument
4
Support the instrument by holding the sides at the base.
When the instrument is going to be moved, be sure to move the measurement
head to the center, turn OFF the power switch, unplug the power cable from
the AC outlet, and disconnect other cables. Otherwise, the cable may be dam-
aged, which may result in fire or electric shock.
Also, when the instrument is going to be carried, support the bottom of the
instrument and hold it horizontally.
Do not hold it by the face rest or other parts as they may come off, resulting in
injury.
Do not hit or drop the instrument. The instrument may be damaged if it
receives a strong jolt, which may result in fire or electric shock if the instru-
ment is used without being repaired.
START switch.
– 62 –