Canon TX-F Operation Manual page 24

4.2 Relation between Settings and Measurement Operation
Settings
Measur SET Mode
ement
Mode
(AUTO/
DE-
PRINT
MANU.
FAULT
switch
FULL
ON
AUTO
MAN-
UAL
AUTO ON
AUTO
TRANS
PRINT
Alignment and measurement are per-
formed manually. Result is printed and
transferred by pressing PRINT switch.
ON/
Then, the measurement head returns to
ON
OFF
initial position.
After printing/transferring/deleting the
result, instrument returns to FULL
AUTO mode.
Alignment and measurement are per-
formed manually. Result is printed and
transferred by pressing PRINT switch.
ON/ Then, the measurement head returns to
ON
OFF
initial position.
After printing/transferring/deleting the
result, instrument returns to AUTO
mode.
– 14 –
Measurement Operation Use
To print and transfer the
result after manual mea-
surement from FULL
AUTO mode.
To print and transfer the
result after manual mea-
surement from AUTO
mode.