Combining Quick Dial Numbers; Tone Or Pulse - Brother MFC-7340 User Manual

Chapter 8
g
Do one of the following:
Enter the pinyin using the dial pad
(up to 15 characters).
Press OK.
Press OK to store the number
without a pinyin.
h
Do one of the following:
If you want to save a fax resolution
along with the number, Press a or b
to choose Std, Fine, S.Fine or
Photo.
Press OK.
Press OK if you do not want to
change the default resolution.
i
Do one of the following:
To store another group for
broadcasting, press OK. Go to b.
To finish storing groups for
broadcasting, press Stop/Exit.
Note
You can easily print a list of all your Speed
Dial numbers. Numbers that are part of a
group will be marked in the Group column.
(See Reports on page 67)
Combining quick dial
numbers
You can combine more than one Quick Dial
number when you dial. This feature may be
useful if you need to dial an access code for
a cheaper rate from another long distance
carrier.
For example, you might have stored '555' on
Speed Dial #003 and '7000' on Speed Dial
#002. You can use them both to dial
'555-7000' if you press the following keys:
Press Search/Speed Dial, 003. Press
Search/Speed Dial, 002 and Start.
Numbers can be added manually by entering
them on the dial pad:
56
Press Search/Speed Dial, 003, 7001 (on the
dial pad), and Start.
This would dial '555-7001'. You can also add
a pause by pressing the Redial/Pause key.

Tone or pulse

If you have a Pulse dialling service, but need
to send Tone signals (for example, for
telephone banking), follow the instructions
below. If you have Touch Tone service, you
will not need this feature to send tone signals.
a
Press Hook.
b
Press # on the machine's control panel.
Any digits dialled after this will send tone
signals.
When you hang up, the machine will
return to the Pulse dialling service.
8
8