Acceptable Paper And Other Print Media; Recommended Paper And Print Media; Type And Size Of Paper - Brother MFC-7340 User Manual

Chapter 2
Acceptable paper and
other print media
Print quality may vary according to the type of
paper you are using.
You can use the following types of print
media: plain paper, bond paper, recycled
paper, transparencies, labels or envelopes.
For best results, follow the steps below:
Use paper made for plain paper copying.
Use paper that is 75 to 90 g/m
Use labels and transparencies which are
designed for use in laser machines.
Do not put different types of paper in the
paper tray at the same time because it
may cause paper jams or misfeeds.
For correct printing, you must choose the
same paper size from your software
application as the paper in the tray.
Avoid touching the printed surface of the
paper immediately after printing.
When you use transparencies remove
each sheet immediately to prevent
smudging or paper jams.
Use long grain paper with a neutral Ph
value, and a moisture content of approx
5%.
14
Recommended paper and
print media
2
To get the best print quality, we suggest using
the following paper.
Paper Type Item
Plain Paper
2

Type and size of paper

.
The machine loads paper from the installed
standard paper tray or manual feed slot.
Standard paper tray
Since the standard paper tray is a universal
type, you can use any of the paper sizes (one
paper type and size at a time) listed in the
table in Paper capacity of the paper trays
on page 15. The standard paper tray can
hold up to 250 sheets of Letter/A4 size paper
(80 g/m
maximum paper mark on the sliding paper
width guide.
Manual Feed Slot
The manual feed slot can hold a sheet with a
size of 76.2 to 220 mm wide and 116 to
406.4 mm long. You can use the manual feed
slot if you are using special paper, envelopes
or labels.
APP Blue Flagship 70 g/m
APP Gold Flagship 80 g/m
Advanced Agro Double A 80 g/m
2
). Paper can be loaded up to the
2
2
2
2
2
2
2