General Setup; Mode Timer; Paper Settings; Paper Type - Brother MFC-7340 User Manual

3

General setup

Mode timer

The machine has three mode keys on the
control panel: Fax, Scan, and Copy.
You can set how much time the machine
takes after the last Copy or Scan operation to
return to Fax mode. If you choose Off, the
machine will stay in the mode you used last.
(MFC-7840N only) Also, this setting sets the
time the machine will change from individual
user to public user when using Secure
Function Lock. (See Switching Users
on page 29.)
a
Press Menu, 1, 1.
b
Press a or b to choose 0 Sec,
30 Secs, 1 Min, 2 Mins, 5 Mins or
Off.
Press OK.
c
Press Stop/Exit.

Paper settings

Paper type

Set up the machine for the type of paper you
are using. This will give you the best print
quality.
a
Press Menu, 1, 2.
b
Press a or b to choose Plain,
Plain(Thick), Thick, Thicker,
Transparency or Recycled Paper.
Press OK.
c
Press Stop/Exit.
20

Paper size

3
You can use seven sizes of paper for printing
copies: A4, Letter, Executive, A5, A6, B5 and
B6 and two sizes for printing faxes: A4 or
Letter.
When you change the size of paper in the
tray, you will also need to change the setting
for paper size at the same time so your
machine can fit the document or an incoming
fax on the page.
a
Press Menu, 1, 3.
b
Press a or b to choose A4, Letter,
Executive, A5, A6, B5 and B6.
Press OK.
c
Press Stop/Exit.
Note
If you chose Transparency as the paper
type (Menu, 1, 2) you will only be able to
choose Letter or A4 size paper in Step
b.
3
3
3
3