Brother MFC-7340 User Manual page 104

Printing difficulties (continued)
Difficulties
The headers or footers appear
when the document displays on the
screen but they do not show up
when it is printed.
Scanning difficulties
Difficulties
TWAIN errors appear while
scanning.
OCR does not work.
(MFC-7840N only) Network
scanning does not work.
Software difficulties
Difficulties
Cannot install software or print.
Cannot perform '2 in 1' or '4 in 1'
printing.
The machine does not print from
Adobe Illustrator.
Paper handling difficulties
Difficulties
The machine does not load paper.
The LCD shows No Paper or a
Paper Jam message.
How do I print on envelopes?
Which paper can I use?
There is a paper jam.
94
Suggestions
There is an unprintable area on the top and bottom of the page. Adjust the top and
bottom margins in your document to allow for this.
Suggestions
Make sure that the Brother TWAIN driver is chosen as the primary source. In
® ®
Presto! PageManager , click File, Select source and choose the TW-Brother
MFC-XXXX.
Try increasing the scanning resolution.
See Network difficulties (MFC-7840N only) on page 95.
Suggestions
Run the Repair MFL-Pro Suite program on the CD-ROM. This program will repair
and reinstall the software.
Check that the paper size setting in the application and in the printer driver are the
same.
Try to reduce the print resolution. (See Advanced tab in the Software User's Guide
on the CD-ROM.)
Suggestions
If there is no paper, load a new stack of paper into the paper tray.
If there is paper in the paper tray, make sure it is straight. If the paper is curled,
you should straighten it. Sometimes it is helpful to remove the paper, turn the
stack over and put it back into the paper tray.
Reduce the amount of paper in the paper tray, and then try again.
If the LCD shows Paper Jam message and you still have a problem, see
Paper jams on page 112.
You can load envelopes from the manual feed slot. Your application must be set
up to print the envelope size you are using. This is usually done in the Page Setup
or Document Setup menu of your application. (See your application's manual for
more information.)
You can use plain paper, recycled paper, transparency and labels that are made
for laser machines. (For details, see Acceptable paper and other print media
on page 14.)
(See Paper jams on page 112.)