For Fax/Tel Mode Only; Connecting An External Or Extension Telephone; Using A Non-Brother Cordless External Handset - Brother MFC-7340 User Manual

Chapter 7

For Fax/Tel mode only

When the machine is in Fax/Tel mode, it will
use the F/T Ring Time (pseudo/double-
ringing) to alert you to pick up a voice call.
Lift the external telephone's handset, and
then press Hook to answer.
If you are at an extension telephone, you will
need to lift the handset during the F/T Ring
Time and then press #51 between the
pseudo/double rings. If no one is on the line,
or if someone wants to send you a fax, send
the call back to the machine by pressing l51.
Connecting an external or
extension telephone
You can connect a separate telephone
directly to your machine as shown in the
diagram below.
EXT.
LINE
1 Extension telephone
2 External telephone
When you are using an external telephone,
the LCD shows Telephone.
50
Using a non-Brother cordless
7
external handset
If your non-Brother cordless telephone is
connected to the telephone line cord (see
page 50) and you typically carry the cordless
handset elsewhere, it is easier to answer
calls during the Ring Delay.
If you let the machine answer first, you will
have to go to the machine so you can press
Hook to transfer the call to the cordless
handset.
Note
• If you are always disconnected when
accessing your external TAD remotely, try
changing the Fax Receive Code and
7
Telephone Answer Code to another
three-digit code using the numbers 0-9, l,
#.
• Remote Codes might not work with some
telephone systems.
1
• Not all brands of cordless telephones are
compatible for use with your machine.
2
7