Commands Descriptions; Pjl Output Tray; Pcl Output Tray; Ps Output Tray Command - Brother HL-1050 Technical Reference Manual

8/2/2010
3.1.

Commands Descriptions

3.1.1. PJL output tray

Format
@PJL SET/DEFAULT OUTBIN=TrayName
Parameter
TrayName*
FINISHER:
Default = ALLSTACKER
Explanation
This command selects the Finisher/Stapler unit.
This command is ignored when the Finisher/Stapler unit is not available.
The difference between the SET and DEFAULT selection and the effective period of this setting follow the
PJL specifications.

3.1.2. PCL output tray

Command
Esc&l#G (27)(38)(108)#(71)
Parameter
# denotes the output tray.
100
:
Default = 1
Explanation
This command selects the Finisher/Stapler unit.
This command is ignored when the Finisher/Stapler unit is not available.
The PJL OUTBIN command is ignored when this command is executed.
3.1.3. PS output tray
Command
<</BROutbinMode #>>setpagedevice
Parameter
#
3:
Default = 0
Explanation
This command selects the Finisher/Stapler unit.
This command is ignored when the Finisher/Stapler unit is not available.
<Example>
<</BROutbinMode 3>>setpagedevice
APPENDIX E REFERENCE LIST OF FS-5050 SERIES UNIQUE COMMANDS - 4
Select the tray of the Finisher/Stapler unit
Select the Finisher/Stapler unit.
Select the Finisher/Stapler unit.
<1Bh><38h><6ch>#<47h>