Brother HL-1050 Technical Reference Manual page 327

02/08/2010
Set quadruple-density image mode
EscZn
1
data>
This command enables you to define and print a single line raster bit image on a single text line.
n and n
1
The image consists of 256*n
Images are printed left to right.
Images are printed at an approximate horizontal resolution of 240 dots per inch and at an approximate
vertical resolution of 72 dots per inch.
Each byte represents a vertical column of eight dots, the most significant bit representing the dot at the top.
Simply set a bit to 1 if you want a dot to appear in that position, and to 0 if you want white space to appear.
10 WIDTH "LPT1:",255
20 LPRINT "*** ESC Z n1 n2 ***";CHR$(10);
30 FOR I=1 TO 5
40 '* QUADRUPLE-DENSITY BIT IMAGE MODE *
50 LPRINT CHR$(27);"Z";CRH$(16);CHR$(0);
60 FOR J=1 TO 8
70 FOR K=1 TO 20
80 N=2^J-1
90 LPRINT CHR$(N);
100 NEXT K
110 NEXT J
120 LPRINT CHR$(10);
130 NEXT I:END
< Sample 18 >
n <image data> (27)(90)n1n2<image data>
2
define the number of bytes that comprise the image.
2
+n
1
CHAPTER 7 IBM PROPRINTER - 20
bytes of data, each byte representing a single vertical column of 4/30".
2
<1Bh><5Ah>n1n2<image