Set Color To Palette - Brother HL-1050 Technical Reference Manual

8/2/2010
3. COLOR PALETTES
3.1. Set Color #1
Command
ESC*v#A (27)(42)(118)#(65) <1Bh><2Ah><76h>#<41h>
Range = -32767 ~ 32767
Default value = 0
This command sets the red value in the palette. Use the Set Color to Palette command to set the value
The value range to be set varies depending on the specified black/white reference.
3.2. Set Color #2
Command
ESC*v#B (27)(42)(118)#(66) <1Bh><2Ah><76h>#<42h>
Range = -32767 ~ 32767
Default value = 0
This command sets the green value in the palette. Use the Set Color to Palette command to set the value.
The value range to be set varies depending on the specified black/white reference.
3.3. Set Color #3
Command
ESC*v#C (27)(42)(118)#(67) <1Bh><2Ah><76h>#<43h>
Range = -32767 ~ 32767
Default value = 0
This command sets the blue value in the palette. Use the Set Color to Palette command to set the value.
The value range to be set varies depending on the specified black/white reference.
3.4.

Set Color to Palette

Command
ESC*v#I (27)(42)(118)#(73) <1Bh><2Ah><76h>#<49h>
Range = 0 ~ (2
command.)
Default value = 0
This command sets the red, green and blue values which are set by the Set Color #1, #2, #3 commands in the
palette.
When an out of range value is set, it is ignored in the palette.
This command sets the value which was set by the Set Color #1, #2, #3 commands to 0.
n
- 1) (The value n is specified by the Bit/Index setting in the Set PCL Color Setting
CHAPTER 3 "PCL5C" - 10