Ps Mailbox Protection & Bin Number Setting - Brother HL-1050 Technical Reference Manual

3.1.6. PS mailbox protection & bin number setting
Command
<HL-2060>
# setoutputprotect
<HL-2460/3260/7050>
<</BROutbinProtect #>> setpagedevice
Parameter
#
<HL-2060/2460/7050>
Lower unit:
Lower unit + Upper unit: #1 to 10 from bottom to top
<HL-3260>
#1 to 4 from bottom to top
Default = 0
Explanation
This operator sets the bins with numbers larger than the TrayNumber specified as mailbox use only. They
cannot then be used for either stacker or sorter functions.
If the bin number is set to 0, the mailbox protection is released, then all bins can be used for stacker and
sorter functions.
If the bin number is set out of the effective range, this operator is ignored.
<HL-2060/2460/7050>
Setting type
MX not installed
Lower unit installed
Lower & upper unit installed
<HL-3260>
Setting type
MX not installed
MX installed
<Example>
(HL-2060)
This operator is registered in 'statusdict'.
statusdict begin
5 setoutputprotect
end
(HL-2460/3260/7050)
<</BROutbinProtect 4>> setpagedevice
APPENDIX D REFERENCE LIST OF MX-2000/4000/5000/7000 SERIES UNIQUE COMMANDS - 9
#1 to 5 from bottom to top
Effective range
0
0, 1 ∼ 5
0, 1 ∼ 10
Effective range
0
0, 1 ∼ 4
8/2/2010