Brother HL-1050 Technical Reference Manual page 255

8/2/2010
2.
The following values are PCL (HP LaserJet emulation) specific and can be set and requested using PJL.
These variables must be set using the LPARM : PCL option.
Variables
FONTSOURCE
FONTNUMBER
PITCH
PTSIZE
SYMSET
LEFTMARGIN
RIGHTMARGIN
TOPMARGIN
BOTMARGIN
FORMLINES
AUTOLF
AUTOCR
AUTOWRAP
AUTOSKIP
3.
The currently defined PostScript specific variable is listed as follows. This variable can be set using the
LPARM : POSTSCRIPT option.
Variable
PRTPSERRS
PCL-Specific Variables
Description
The valid values for
FONTSOURCE are
I (Internal Fonts)
C (Cartridge Fonts)
C1 (Card Fonts)
S (Permanent Soft Fonts)
If the specified value becomes
invalid, it is automatically changed
to the default value.
Font number. This value can be
seen on the Print Font Test selected
from the Control Panel. This value
is automatically changed to the
lowest value whenever the
FONTSOURCE setting is changed.
Pitch of the default font in units of
characters per inch. The pitch value
can be specified to two decimal
places
Height of the default font in units
of points. The point size can be
specified to a quarter of a point
Symbol set
Sets the left margin.
Sets the right margin
Sets the top margin
Sets the bottom margin.
Sets the number of lines per page.
Sets AUTO LF
Sets AUTO CR
Sets AUTO WRAP
Sets AUTO SKIP
PostScript-Specific Variable
Description
The printing of a PostScript error
page is enabled or disabled by this
variable
CHAPTER 5 PJL- 52
Sample Value Range
I, C, C1, S,
0, 1, 2, ..n
0.44, 0.45, 99.99
4.00, 4.25, .......999.75
ROMAN8, ISOL1, ISOL2, ISOL5,
PC8, PC8DN, PC850, PC852, PC8TK,
WINL1, WINL2, WINL5, DESKTOP,
PSTEXT, VNINTL, VNUS,
MSPUBL, MATH8, PSMATH,
VNMATH, PIFONT, LEGAL, ISO2,
ISO4, ISO6, ISO10, ISO11, ISO 14,
ISO15, ISO16, ISO17, ISO21, ISO 25,
ISO 57, ISO60, ISO61, ISO69, ISO84,
ISO85, WIN30, HPGERM, HPSPAN,
MCTEXT
0 to 145 columns
10 to 155 columns
0, 0.33, 0.5, 1.0, 1.5, 2.0 inch
0, 0.33, 0.5, 1.0, 1.5, 2.0 inch
5 to 128 lines
ON or OFF
ON or OFF
ON or OFF
ON or OFF
Sample Value Range
OFF, ON