Command Group - Brother HL-1050 Technical Reference Manual

3.

COMMAND GROUP

Command Group
Kernel Commands
Job Separation
Commands
Environment
Commands
Status Readback
Commands
Device Attendance
Commands
Command
UEL
EXECUTE
SUPERUSER
SUPERUSEROFF
WNVRAM
RNVRAM
COMMENT
ENTER
JOB
EOJ
DEFAULT
SET
INITIALIZE
RESET
INQUIRE
DINQUIRE
ECHO
INFO
USTATUS
USTATUSOFF
RDYMSG
OPMSG
STMSG
CHAPTER 5 PJL - 9
Command Description
Exits current printer language and returns control
to PJL.
Orders the printer to execute the specified
operation.
Moves to the SUPERUSER mode.
Exit from the SUPERUSER mode.
Write the specified data to the specified address
of the printer's NVRAM.
Retrieve the data from the specified address of the
printer's NVRAM.
Comments can be placed in the command line
Selects a printer language
Informs printer of job start
Informs printer of job end
Sets default value
Sets an environment value which is available
during a PJL job
Resets the current and default PJL variables to
factory values
Resets current PJL variables to default values
Requests the current value for a specified
environment
Requests the default value for a specified
environment
Returns the <words> to the host computer
Requests a specified category.
Allows the printer to send unsolicited status
information
Stops the printer sending all unsolicited status
information
Replaces the READY message on the control
panel
Displays altered message on the control panel and
takes the printer off-line
Displays altered message on the control panel and
takes the printer off-line. If status readback is
enabled, returns name of the key.
2010/08/02